Which Blu Ray Player is better with my TV?

Fun Bimmer

My 46" LCD TV has 1080p 120htz. For the best possible image, which is a better blu ray player, one with 1080p/24 or 1080p/60 ? also what HDMI cable performs best?

Answer
Blu-ray is native 1080p/24 fps. To display on a 1080p/120 Hz HDTV the frame rate must be changed. Both are simple multiples (24x5 or 60x2), but the native 24 is better since it involves less video processing than 24>60 and 60>120.

Most Blu-ray players will output both 24 and 60 fps, so pick one with features you like (they all differ somewhat) and use the "native" 1080p/24 setting for Blu-ray. Panasonic and Sony have had less problems than Samsung. The arguably best player is the new Oppo (it's a great Blu-ray player, and also a DVD-A and SACD player. Excellent Anchor Bay video processing ... but $500.

HDMI is a digital connection and other than potential lower risk of corrosion related connection issues with gold plated contacts there is little performance difference between the cheapest and most expensive HDMI cables. Some designs will work at longer lengths than others at high bitrate ... important for long distance, but irrelevant for most uses. Look for a cable certified as Category 2 against HDMI 1.3 and you can't go far wrong. Monoprice.com have good cables at low prices and have excellent service.

How do I set up a Blu Ray player with WiFi?

Tagg R

I connected the WiFi Blu Ray player to my TV with an HDMI cable, and to a surround sound speaker receiver with the two basic red and white jacks. When I turn the Blu Ray player on, it starts up with a Sony Blu Rey screen on the TV, says NO DISK on the panel display, then switches to a blue and black screen for a few seconds, then disengages itself from the TV completely, and says SETUP on the panel display. Nothing comes on the TV, and the player eventually turns itself off after about 2 minutes. I think I did everything in the directions correctly... Is there something I'm missing or do I have a flawed product?

The HDMI is the only thing connected to the TV, so I know that's working (for about 10 seconds). I haven't heard any sound but I also haven't expect any from what I've tried to do with it.

Answer
I would think that your blu-ray is set to output 1080 and your TV is only 720. Check your manual on changing the resolution. This done via "set up"

Powered by Yahoo! Answers

How do I set up a Blu Ray player with WiFi?

Tagg R

I connected the WiFi Blu Ray player to my TV with an HDMI cable, and to a surround sound speaker receiver with the two basic red and white jacks. When I turn the Blu Ray player on, it starts up with a Sony Blu Rey screen on the TV, says NO DISK on the panel display, then switches to a blue and black screen for a few seconds, then disengages itself from the TV completely, and says SETUP on the panel display. Nothing comes on the TV, and the player eventually turns itself off after about 2 minutes. I think I did everything in the directions correctly... Is there something I'm missing or do I have a flawed product?

The HDMI is the only thing connected to the TV, so I know that's working (for about 10 seconds). I haven't heard any sound but I also haven't expect any from what I've tried to do with it.

Answer
I would think that your blu-ray is set to output 1080 and your TV is only 720. Check your manual on changing the resolution. This done via "set up"

If I buy a blu ray player can I use it on my tv even though it doesn't have a HDMI port? ?

Joey J

My tv is HD ready though so what way can I connect it without having to buy a Ps3 and run it through vga?
What blu ray players work with other cables? All i've seen are ones that come with hdmi output..

Answer
>What blu ray players work with other cables? All i've seen are ones that come with hdmi output<

There are simply too many possibilities out there to answer this question. You are simply going to have to figure out what sort of inputs your TV has and then check what sort of outputs any blu-ray player you are looking at has. I have NEVER seen one yet with ONLY HDMI outputs. Take, for example the Sony BDPS350. Follow this link then select the Specifications tab. http://www.sonystyle.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10551&storeId=10151&langId=-1&productId=8198552921665368427

It says:
Inputs and Outputs
Analog Audio Output(s) : 2 Channel: 1 (Rear)

Coaxial Audio Digital Output(s) : 1 (Rear)

Component Video (Y/Pb/Pr) Output(s) : (Y/Pb/Pr) OUtput(s): 1 (Rear)

Composite Video Output(s) : 1 (Rear)

HDMI⢠Connection Output(s) : 1 (Rear)

Optical Audio Output(s) : 1 (Rear)

S-Video Output(s) : 1 (Rear)


So you have a lot of choices...

Powered by Yahoo! Answers

What blu ray players will be compatible with my old tv?

blu ray player 2 hdmi outputs image

HRS

Hi everyone. I'm a college student with an old Samsung TV that has inputs for red, white yellow cables as well as green blue and red. I'd like a blu ray player that can hook up to the internet (so I don't have to get cable, I can just watch netflix). My pipedream hope is for one around $50, but I'm more realistically looking around $80. Does anyone know any models that will work with my tv and play from the internet? Will these players also play my DVDs? Thanks!

Answer
The yellow connector is analog composite video, which can not carry HD (it's not even the best for SD).

The red, blue and green set of connectors carry component video, which IS capable of carrying HD even though it is not digital. Component HDTV is generally limited to 1080i (there are exceptions).

The red and white pair is of course right and left (respectively) analog audio.

Is your "old Samsung TV" an "HD Ready" TV? If it is an "HD Ready" TV that accepts 1080i over its component inputs, that would be great.
It could just be a standard definition TV that has component video inputs for progessive-scan DVD playback, but not capable of HD through those inputs. It would still be better over component than composite (at least you'd have progressive scan); composite would be your last resort.

Older Blu-Ray players did have component video outputs for HD video, but they quickly switched over to HDMI for several reasons -- see below.

Used/refurbished Blu-Ray players with component video outputs can be found for sale on the web if you search for "Blu-Ray player with component video output." I found some in your price range when I searched.

At "brick and mortar" stores... you might find one at a pawn shop or a resale shop.

Edit: One more thought -- This might all be for naught if your main reason is to hook up your TV to the internet, because older Blu-Ray players are not as likely to have that feature.
Do you have a laptop computer? You could just watch Netflix etc. on that.

-----------------------------------
Sidebar: Why did HD device makers drop component video and adopt HDMI?
1. Convenience for consumer: One cable for video and audio.
2. Digital transmission of the signals: immunity to RFI/EMI and cable-length issues (up to a point).
3. (IMHO the most important reason of all for manufacturers and distributors): DIGITAL RIGHTS MANAGEMENT (aka copy protection).
Component video is not encrypted, so a tech-savvy person could copy HD content carried by it. To prevent copying HD content, HDCP ("Highband Digital Content Protection") is used. HDCP encrypts HD content and checks every link in the chain from source to screen for full compliance (to prevent a "rogue" device in the chain from making copying possible). They even put an updated list of rogue devices on new Blu-Ray discs as they release them. At the content maker/distributor's choice, one of two things can happen if any link in the chain is not HDCP compliant: either it will display the content non-HD, or it will pop up a box on the screen saying that it can't play the content unless the non-compliant device is replaced.

How do I hook up my Sony Bravia surround sound system to my Blu Ray player?

I need ans

I have a Sony wireless Bravia speaker system with 5 disk DVD player.

I'm having trouble connecting my Blu Ray player to it.

It's a DAV-HDX 589WF Bravia.

I even tried connecting HDMI to my TV and optical cable to the DVD.

I either have picture or sound not both.

Any idea how to fix this?

Answer
"I even tried connecting HDMI to my TV and optical cable to the DVD."

That is exactly the way you want to connect it, because your receiver doesn't have any video inputs, only audio inputs.

The trick is that you have to set the TV's input to where the Blu-ray player is plugged in (HDMI 2?), so that you get the video. Then you set the receiver input source to play the optical audio from the Blu-ray player (it might be called auxiliary or external, optical 1).

You may also need to set the Blu-ray player to output audio from the optical port. Perhaps your player disables optical audio output when an HDMI cable is plugged into it, or else the port is disabled by default and needs to be enabled (set optical audio output to on).

Powered by Yahoo! Answers

Does an HDMI switch exist to connect one device to multiple outputs?

blu ray player 2 hdmi outputs image

swizoidl

For example, if you wanted to connect a blu-ray player via HDMI to 2 different TVs. Is there a switch that you could use to connect the 2 TVs and easily switch between the two outputs?

Answer
The first two answers are reasonable but need some clarification. The first link is to a 2X1 automatic switch - this means it is designed for 2 Inputs and 1 Output - the opposite of what you need. It may work reversed (single HDMI cables are reversible and bi-directional) but I would not count on it - I could not find where the product info said it does, and I don't know. But at least it is HDCP compliant.
The second two links are for amplified splitters, which will work - except I can't find where they are HDCP compliant, so if you are playing HDCP encoded content, it may not work.
This is what Grumpy was referring to (and he means HDCP - High-bandwidth Digital Content Protection, not DHCP which is Dynamic Host Configuration Protocol, a way of automatic assignment of IP addresses by a router). BUT - HDMI is not "...all about copy-protection". While HDCP IS implemented in HDMI (and DVI and DisplayPort, for example) the Content must be encoded for that HDCP to come into play. HDMI itself does not create the HDCP - merely carries it between source and display IF the content tells it to - see here:

http://www.digital-cp.com/files/documents/04A897FD-FEF1-0EEE-CDBB649127F79525/HDCP_deciphered_070808.pdf

The pertinent sentences are: "HDCP protects content using authentication and encryption. Before sending HDCP-protected data, the transmitting device initiates an authentication process to confirm that the receiver is authorized to receive the data."
Hope this helps clear up confusion - good luck!

How do I get true 5.1 surround sound out of an optical audio cable?

Rob

Before you answer you have to look at my setup first..

Audio/video sources: directv receiver, ps3, seperate Samsung blu ray player.
Sending those signals to tv via hdmi.

Samsung HDTV with 3 hdmi inputs. No hdmi outputs and 1 optical output.

Audio surround sound amplifier: 5.1 channel Panasonic SC-PT760. 1 hdmi output. 1 optical input. NO hdmi input.

Sending audio to this via optical output from tv to optical input to 5.1 receiver.




My surround sound system is a Panasonic sc-pt760. It does not have an hdmi input. So to get my "surround sound" I have hooked up a clear colored Philips Optical cable and the tv sends all audio to my Panasonic surround sound receiver to its optical input. This way I don't have to switch audio inputs. Whatever the tv plays the receiver plays.

My question is how do I get true 5.1 surround sound? Because when I switch the Panasonic surround sound receiver off of Dolby pro logic 2 setting, the rear left and right surround sound speakers don't have any sound suggesting the only reason they had sound was because when Dolby pro logic 2 was on it was converting 2 channel stereo audio to fake 5.1 audio.

So does that mean the tv can't output 5.1 through it's optical output? I don't know how to get true 5.1 to my receiver without a lot of plugging in and unplugging when I'm using that source.

Please only qualified individuals answer. I don't want opinions. I just want somebody who either does this for a living or really knows their stuff. Thanks in advance. :)

Answer
I would like to apologize to you for those who keep reminding you the HT in a box are no good.
In tough times like today, not a lot of people could afford to just ditch their HT in a box, and get a new system. Jeeeezz!

Keep in mind that not all TV channels broadcasts in 5.1. Most DVD & Blu-rays do.

That's why the system has that DPL2 is to simulate those not true 5.1 audio signals.

No matter how expensive you pro system, like these folks keep recommending, it will not play true 5.1 audio if the source media was not recorded in 5.1.

Panasonic is a very respectable brand, they would not falsely indicate that your system will play 5.1 audio if it really does not.

Powered by Yahoo! Answers

How do I get true 5.1 surround sound out of an optical audio cable?

blu ray player 2 hdmi outputs image

Rob

Before you answer you have to look at my setup first..

Audio/video sources: directv receiver, ps3, seperate Samsung blu ray player.
Sending those signals to tv via hdmi.

Samsung HDTV with 3 hdmi inputs. No hdmi outputs and 1 optical output.

Audio surround sound amplifier: 5.1 channel Panasonic SC-PT760. 1 hdmi output. 1 optical input. NO hdmi input.

Sending audio to this via optical output from tv to optical input to 5.1 receiver.




My surround sound system is a Panasonic sc-pt760. It does not have an hdmi input. So to get my "surround sound" I have hooked up a clear colored Philips Optical cable and the tv sends all audio to my Panasonic surround sound receiver to its optical input. This way I don't have to switch audio inputs. Whatever the tv plays the receiver plays.

My question is how do I get true 5.1 surround sound? Because when I switch the Panasonic surround sound receiver off of Dolby pro logic 2 setting, the rear left and right surround sound speakers don't have any sound suggesting the only reason they had sound was because when Dolby pro logic 2 was on it was converting 2 channel stereo audio to fake 5.1 audio.

So does that mean the tv can't output 5.1 through it's optical output? I don't know how to get true 5.1 to my receiver without a lot of plugging in and unplugging when I'm using that source.

Please only qualified individuals answer. I don't want opinions. I just want somebody who either does this for a living or really knows their stuff. Thanks in advance. :)

Answer
I would like to apologize to you for those who keep reminding you the HT in a box are no good.
In tough times like today, not a lot of people could afford to just ditch their HT in a box, and get a new system. Jeeeezz!

Keep in mind that not all TV channels broadcasts in 5.1. Most DVD & Blu-rays do.

That's why the system has that DPL2 is to simulate those not true 5.1 audio signals.

No matter how expensive you pro system, like these folks keep recommending, it will not play true 5.1 audio if the source media was not recorded in 5.1.

Panasonic is a very respectable brand, they would not falsely indicate that your system will play 5.1 audio if it really does not.

What blu ray players will be compatible with my old tv?

HRS

Hi everyone. I'm a college student with an old Samsung TV that has inputs for red, white yellow cables as well as green blue and red. I'd like a blu ray player that can hook up to the internet (so I don't have to get cable, I can just watch netflix). My pipedream hope is for one around $50, but I'm more realistically looking around $80. Does anyone know any models that will work with my tv and play from the internet? Will these players also play my DVDs? Thanks!

Answer
The yellow connector is analog composite video, which can not carry HD (it's not even the best for SD).

The red, blue and green set of connectors carry component video, which IS capable of carrying HD even though it is not digital. Component HDTV is generally limited to 1080i (there are exceptions).

The red and white pair is of course right and left (respectively) analog audio.

Is your "old Samsung TV" an "HD Ready" TV? If it is an "HD Ready" TV that accepts 1080i over its component inputs, that would be great.
It could just be a standard definition TV that has component video inputs for progessive-scan DVD playback, but not capable of HD through those inputs. It would still be better over component than composite (at least you'd have progressive scan); composite would be your last resort.

Older Blu-Ray players did have component video outputs for HD video, but they quickly switched over to HDMI for several reasons -- see below.

Used/refurbished Blu-Ray players with component video outputs can be found for sale on the web if you search for "Blu-Ray player with component video output." I found some in your price range when I searched.

At "brick and mortar" stores... you might find one at a pawn shop or a resale shop.

Edit: One more thought -- This might all be for naught if your main reason is to hook up your TV to the internet, because older Blu-Ray players are not as likely to have that feature.
Do you have a laptop computer? You could just watch Netflix etc. on that.

-----------------------------------
Sidebar: Why did HD device makers drop component video and adopt HDMI?
1. Convenience for consumer: One cable for video and audio.
2. Digital transmission of the signals: immunity to RFI/EMI and cable-length issues (up to a point).
3. (IMHO the most important reason of all for manufacturers and distributors): DIGITAL RIGHTS MANAGEMENT (aka copy protection).
Component video is not encrypted, so a tech-savvy person could copy HD content carried by it. To prevent copying HD content, HDCP ("Highband Digital Content Protection") is used. HDCP encrypts HD content and checks every link in the chain from source to screen for full compliance (to prevent a "rogue" device in the chain from making copying possible). They even put an updated list of rogue devices on new Blu-Ray discs as they release them. At the content maker/distributor's choice, one of two things can happen if any link in the chain is not HDCP compliant: either it will display the content non-HD, or it will pop up a box on the screen saying that it can't play the content unless the non-compliant device is replaced.

Powered by Yahoo! Answers

How to play a movie onto two TV with one Blu-Ray player?

blu ray player 2 hdmi outputs image

Brian

My mom has a nail salon that has two HD TV on two different location and a newly bought Blu-Ray player. How do you connect one Blu-Ray player to show on two TV simultaneously?

Answer
There's a few different ways to go about doing this - but it depends on the quality that you are after.
1. For the best picture - you will need to hook up the TVs to an HDMI Splitter. One cable will come out of the Blu-Ray player, and then the splitter will have an output to each of the TVs. This will give both TVs the absolute best picture - if they have HDMI that is. You can get the splitter and the cables for the best price at http://www.monoprice.com.

2. Another way to do it is to hook up one TV with an HDMI cable, and the other with Component Video cables. The Blu-Ray player will have both outputs. The only downside to this, is that one TV will have Full HD Video, and the other will have 480p (DVD quality picture).

3. Another option is to use a component video splitter, and hook it up the same way as I mentioned in step one. You can get long component video cables, and splitters at the website mentioned above (http://www.monoprice.com).

That's the easiest ways to do it. I have an HDMI splitter so that when we have a bunch of people over to watch the superbowl or whatever, I'll take two TVs out to the garage and split the signal to both from my cable box.

Hope that helps.

HTH

Should I replace my receiver to get hdmi?

shaakon1

I just picked up a sony hdtv and will get a blu ray player to acheive 1080p. My Denon 3803 doesn't have an hdmi jack. Do I need to replace it (like the best buy guy said) for best results or will running hdmi to the tv and using the audio outputs from the tv to the denon work ok? Would there be a time lag?

Answer
I would say no. Lag time may be an issue, but can probably be compensated for by the TV or BluRay.

There are 2 main things you will miss out on by not upgrading:

1) Only HDMI will carry TruDolby HD and DTS-Master HD. These are the super high-def, lossless formats that can support uncompressed 7.1. Most material is not and will not be available in True 7.1 uncompressed for a couple years. So your digital inputs on the Receiver are fine for Dolby Digital and DT.

2) Convenience of HDMI switching. i.e. plug all your stuff into your Receiver, then one HDMI to your TV. Saves money on cables and is a cleaner install, if you have a lot of stuff (xBox, DVD, Ipod, Bluray, Wii, etc...).

Hope that helps!


Edit - BTW if your receiver doesn't have HDMI then it won't have 7.1 analog inputs either (too old) so that's kind of dumb.

Powered by Yahoo! Answers