lalaland
I bought this phillips blu-ray player and it worked well the first couple of months but then it started freezing up, it would begin with the philips logo appearing with a green pixelated bar underneath it and then in the menu screen it would show reading disk for 3 seconds and then it would freeze up
Answer
i would take a qtip with a strong isotropy alcohol to the laser lens eye, then use the other end of the qtip to dry it up. ofcourse unplug the player first and be prepared to take it apart, don't don't any of the leads that connect the + and - of any large capacitors, and don't touch any of the ic chips. remember which way the magnet at the top of the cdplayer was before taking it off, it will just fall right off if u turn the player upside down. also don't mess with any of the loading mechinizims as they will just fall apart with little effort but the gears are usually kinda easy to figure out where they went as they have lil pegs where they fit into the centers. don't forget to eject the cd before doing all this, that will save u a lot of butt ache. don't zap urself! unplug, and please be kind, rewind.
keep youself grounded, touch the metal casing often, or run a wire from ur wrist to the case if u think u'll be touching the actual circuitry often
i would take a qtip with a strong isotropy alcohol to the laser lens eye, then use the other end of the qtip to dry it up. ofcourse unplug the player first and be prepared to take it apart, don't don't any of the leads that connect the + and - of any large capacitors, and don't touch any of the ic chips. remember which way the magnet at the top of the cdplayer was before taking it off, it will just fall right off if u turn the player upside down. also don't mess with any of the loading mechinizims as they will just fall apart with little effort but the gears are usually kinda easy to figure out where they went as they have lil pegs where they fit into the centers. don't forget to eject the cd before doing all this, that will save u a lot of butt ache. don't zap urself! unplug, and please be kind, rewind.
keep youself grounded, touch the metal casing often, or run a wire from ur wrist to the case if u think u'll be touching the actual circuitry often
Can connect to netflix with Blu-Ray device?
JAMIMER H
Hello, I just recently purchased a samsung Bd-e5400. Everytime I try to use an app (Netflix, Pandora, etc.) I keep getting a network connection error (hooked up wirelessly). However, when I check the network status it says everything is working fine. The Wifi is working fine in my house and all my other wireless devices have internet. What should I do?
Answer
First check the network using a computer and see if the Blu Ray player is recognized, also check to see if the number assigned is the same as the blu ray is reading out...Try to reinitialize the Wireless router turn it off unplug from the wall compleatly, wait 30 seconds and replug and restart do the same with the Blu ray player if that does not work try to reformat the Blu ray player setting to original configuration and try re-establishing a new wifi connection a new...
First check the network using a computer and see if the Blu Ray player is recognized, also check to see if the number assigned is the same as the blu ray is reading out...Try to reinitialize the Wireless router turn it off unplug from the wall compleatly, wait 30 seconds and replug and restart do the same with the Blu ray player if that does not work try to reformat the Blu ray player setting to original configuration and try re-establishing a new wifi connection a new...
Powered by Yahoo! Answers
Title Post: philips blu-ray keeps freezing?
Rating: 100% based on 998 ratings. 5 user reviews.
Author: Yukie
Thanks For Coming To My Blog
Rating: 100% based on 998 ratings. 5 user reviews.
Author: Yukie
Thanks For Coming To My Blog
No comments:
Post a Comment